Persons using assistive technology might not be able to fully access information in this file. For assistance, please send e-mail to: mmwrq@cdc.gov. Type 508 Accommodation and the title of the report in the subject line of e-mail.

Prepared by

Bin Chen, PhD

MariBeth Gagnon, MS

Shahram Shahangian, PhD

Nancy L. Anderson, MMSc

Devery A. Howerton, PhD

D. Joe Boone, PhD

Division of Laboratory Systems, National Center for Preparedness, Detection, and Control of Infectious Diseases, Coordinating Center for Infectious Diseases

The material in this report originated in the Coordinating Center for Infectious Diseases, Mitchell L. Cohen, MD, Director; National Center for Preparedness, Detection, and Control of Infectious Diseases, Rima Khabbaz, MD, Director; and the Division of Laboratory Systems, Roberta B. Carey, PhD, Acting Director.

Corresponding preparer: Bin Chen, PhD, Division of Laboratory Systems, National Center for Preparedness, Detection, and Control of Infectious Diseases, Coordinating Center for Infectious Diseases, 1600 Clifton Road NE, MS G-23, Atlanta, GA 30329. Telephone: 404-498-2228; Fax: 404-498-2215; E-mail: bkc1@cdc.gov.

Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA) regulations, laboratory testing is categorized as waived (from routine regulatory oversight) or nonwaived based on the complexity of the tests; tests of moderate and high complexity are nonwaived tests. Laboratories that perform molecular genetic testing are subject to the general CLIA quality systems requirements for nonwaived testing and the CLIA personnel requirements for tests of high complexity. Although many laboratories that perform molecular genetic testing comply with applicable regulatory requirements and adhere to professional practice guidelines,specific guidelines for quality assurance are needed to ensure the quality of test performance. To enhance the oversight of genetic testing under the CLIA framework,CDC and the Centers for Medicare & Medicaid Services (CMS) have taken practical steps to address the quality management concerns in molecular genetic testing,including working with the Clinical Laboratory Improvement Advisory Committee (CLIAC). This report provides CLIAC recommendations for good laboratory practices for ensuring the quality of molecular genetic testing for heritable diseases and conditions. The recommended practices address the total testing process (including the preanalytic,analytic,and postanalytic phases),laboratory responsibilities regarding authorized persons,confidentiality of patient information,personnel competency,considerations before introducing molecular genetic testing or offering new molecular genetic tests,and the quality management system approach to molecular genetic testing. These recommendations are intended for laboratories that perform molecular genetic testing for heritable diseases and conditions and for medical and public health professionals who evaluate laboratory practices and policies to improve the quality of molecular genetic laboratory services. This report also is intended to be a resource for users of laboratory services to aid in their use of molecular genetic tests and test results in health assessment and care. Improvements in the quality and use of genetic laboratory services should improve the quality of health care and health outcomes for patients and families of patients.

Genetic testing encompasses a broad range of laboratory tests performed to analyze DNA, RNA, chromosomes, proteins, and certain metabolites using biochemical, cytogenetic, or molecular methods or a combination of these methods. In 1992, the regulations for the Clinical Laboratory Improvement Amendments of 1988 (CLIA) were published and began to be implemented. Since that time, advances in scientific research and technology have led to a substantial increase both in the health conditions for which genetic defects or variations can be detected with molecular methods and in the spectrum of the molecular testing methods (1). As the number of molecular genetic tests performed for patient testing has steadily increased, so has the number of laboratories that perform molecular genetic testing for heritable diseases and conditions (2,3). With increasing use in clinical and public health practices, molecular genetic testing affects persons and their families in every life stage by contributing to disease diagnosis, prediction of future disease risk, optimization of treatment, prevention of adverse drug response, and health assessment and management. For example, preconception testing for cystic fibrosis and other heritable diseases has become standard practice for the care of women who are either pregnant or considering pregnancy and are at risk for giving birth to an infant with one of these conditions (4). DNA-based diagnostic testing often is crucial for confirming presumptive results from newborn screening tests, which are performed forapproximately95% of the 4 million infants born in the United States each year (5,6). In addition, pharmacogenetic and pharmacogenomic tests, which identify individual variations in single-nucleotide polymorphisms, haplotype markers, or alterations in gene expression, are considered essential for personalized medicine, which involves customizing medical care on the basis of genetic information (7).

The expanding field of molecular genetic testing has prompted measures both in the United States and worldwide to assess factors that affect the quality of performance and delivery of testing services, the adequacy of oversight and quality assurance mechanisms, and the areas of laboratory practice in need of improvement. Problems that could affect patient testing outcomes that have been reported include inadequate establishment or verification of test performance specifications, inadequate personnel training or qualifications, inappropriate test selection and specimen submission, inadequate quality assurance practices, problems in proficiency testing, misunderstanding or misinterpretation of test results, and other concerns associated with one or more phases of the testing process (8--11).

Under CLIA, laboratory testing is categorized as waived testing or nonwaived (which includes tests of moderate and high complexity) based on the level of testing complexity. Laboratories that perform molecular genetic testing are subject to general CLIA requirements for nonwaived testing and CLIA personnel requirements for high-complexity testing; no molecular genetic test has been categorized as waived or moderate complexity. Many laboratories also adhere to professional practice guidelines and voluntary or accreditation standards, such as those developed by the American College of Medical Genetics (ACMG), the Clinical and Laboratory Standards Institute (CLSI), and the College of American Pathologists (CAP), which provide specific guidance for molecular genetic testing (12--14). In addition, certain state programs, such as the New York State Clinical Laboratory Evaluation Program (CLEP), have specific requirements that apply to genetic testing laboratories in their purview (15). However, no specific requirements exist at the federal level for laboratory performance of molecular genetic testing for heritable diseases and conditions.

Since 1997, CDC and the Centers for Medicare & Medicaid Services (CMS) have worked with other federal agencies, professional organizations, standard-setting organizations, CLIAC, and other advisory committees to promote the quality of genetic testing and improve the appropriate use of genetic tests in health care. To enhance the oversight of genetic testing under CLIA, CMS developed a multifaceted action plan aimed at providing guidelines, including the good laboratory practice recommendations in this report, rather than prescriptive regulations (16). Many of the activities in the action plan have been implemented or are in progress, including 1) providing CMS and state CLIA surveyors with guidelines and technical training on assessing genetic testing laboratories for compliance with applicable CLIA requirements, 2) developing educational materials on CLIA compliance for genetic testing laboratories, 3) collecting data on laboratory performance in genetic testing, 4) working with CLIAC and standard-setting organizations on oversight concerns, and 5) collaborating with CDC and the Food and Drug Administration (FDA) on ongoing oversight activities (16). This plan also was supported by the Secretary's Advisory Committee on Genetics, Health, and Society (SACGHS) in its 2008 report providing recommendations regarding future oversight of genetic testing (1).

The purposes of this report are to 1) highlight areas of molecular genetic testing that have been recognized by CLIAC as needing specific guidelines for compliance with existing CLIA requirements or needing quality assurance measures in addition to CLIA requirements and 2) provide CLIAC recommendations for good laboratory practices to ensure the quality of molecular genetic testing for heritable diseases and conditions. These recommendations are intended primarily for genetic testing that is conducted to diagnose, prevent, or treat disease or for health assessment purposes. The recommendations are distinct from the good laboratory practice regulations for nonclinical laboratory studies under FDA oversight (21 CFR Part 58) (17).The recommended laboratory practices provide guidelines for ensuring the quality of the testing process (including the preanalytic, analytic, and postanalytic phases of molecular genetic testing), laboratory responsibilities regarding authorized persons, confidentiality of patient information, and personnel competency. The recommendations also address factors to consider before introducing molecular genetic testing or offering new molecular genetic tests and the quality management system approach in molecular genetic testing. Implementation of the recommendations in laboratories that perform molecular genetic testing for heritable diseases and conditions and an understanding of these recommendations by users of laboratory services are expected to prevent or reduce errors and problems related to test selection and requests, specimen submission, test performance, and reporting and interpretation of results, leading to improved use of molecular genetic laboratory services, better health outcome for patients, and in many instances, better health outcomes for families of patients. In future reports, recommendations will be provided for good laboratory practices focusing on other areas of genetic testing, such as biochemical genetic testing, molecular cytogenetic testing, and somatic genetic testing.

With the completion of the human genome project, discoveries linking genetic mutations or variations to specific diseases and biologic processes are frequently reported (18). The rapid progress in biomedical research, accompanied by advances in laboratory technology, have led to increased opportunities for development and implementation of new molecular genetic tests. For example, the number of heritable diseases and conditions for which clinical genetic tests are available more than tripled in 8 years, from 423 diseases in November 2000 to approximately 1,300 diseases and conditions in October 2008 (2,19). Molecular genetic testing is performed not only to detect or confirm rare genetic diseases or heritable conditions (20) but also to detect mutations or genetic variations associated with more common and complex conditions such as cancer (21,22), coagulation disorders (23), cardiovascular diseases (24), and diabetes (25). As the rapid pace of genetic research results in a better understanding of the role of genetic variations in diseases and health conditions, the development and clinical use of molecular genetic tests continues to expand (26--28).

Despite considerable information gaps regarding the number of U.S. laboratories that perform molecular genetic tests for heritable diseases and conditions and the number of specific genetic tests being performed (1), molecular genetic testing is one of the areas of laboratory testing that is increasing most rapidly. Molecular genetic tests are performed by a broad range of laboratories, including laboratories that have CLIA certificates for chemistry, pathology, clinical cytogenetics, or other specialties or subspecialties (11). Although nationwide data are not available, data from state programs indicate considerable increases in the numbers of laboratories that perform molecular genetic tests. For example, the number of approved laboratories in the state of New York that perform molecular genetic testing for heritable diseases and conditions increased 36% in 6 years, from 25 laboratories in February 2002 to 34 laboratories in October 2008 (29).

Although comprehensive data on the annual number of molecular genetic tests performed nationwide are not available, industry reports indicate a steady increase in the number of common molecular genetic tests for heritable diseases and conditions, such as mutation testing for cystic fibrosis and factor V Leiden thrombophilia (3). The number of cystic fibrosis mutation tests has increased significantly since 2001, pursuant to the recommendations of the American College of Obstetricians and Gynecologists and ACMG for preconception and prenatal carrier screening (30,31). The DNA-based cystic fibrosis mutation tests are now considered to be some of the most commonly performed genetic tests in the United States and have become an essential component of several state newborn screening programs for confirming presumptive screening results of infants (32). The overall increase in molecular genetic testing from 2006 to 2007 worldwide has been reported to be 15% in some market analyses, outpacing other areas of molecular diagnostic testing (33).

In 1988, Congress enacted Public Law 100-578, a revision of Section 353 of the Public Health Service Act (42 U.S.C. 263a) that amended the Clinical Laboratory Improvement Act of 1967 and required the Department of Health and Human Services (HHS) to establish regulations to ensure the quality and reliability of laboratory testing on human specimens for disease diagnosis, prevention, or treatment or for health assessment purposes. In 1992, HHS published CLIA regulations that describe requirements for all laboratories that perform patient testing (34). Facilities that perform testing for forensic purposes only and research laboratories that test human specimens but do not report patient-specific results are exempt from CLIA regulations (34). CMS (formerly the Health Care Financing Administration) administers the CLIA laboratory certification program in conjunction with FDA and CDC. FDA is responsible for test categorization, and CDC is responsible for CLIA studies, convening CLIAC, and providing scientific and technical support to CMS. CLIAC was chartered by HHS to provide recommendations and advice regarding CLIA regulations, the impact of CLIA regulations on medical and laboratory practices, and modifications needed to CLIA standards to accommodate technological advances.

In 2003, CMS and CDC published CLIA regulatory revisions to reorganize and revise CLIA requirements for quality systems for nonwaived testing and the laboratory director qualifications for high-complexity testing (35). The revised regulations included facility administration and quality system requirements for every phase of the testing process (35). Requirements for the clinical cytogenetics specialty also were reorganized and revised. Other genetic tests, such as molecular genetic tests, are not recognized as a specialty or subspecialty under CLIA. However, because these tests are considered high complexity, laboratories that perform molecular genetic testing for heritable diseases and conditions must meet applicable general CLIA requirements for nonwaived testing and the personnel requirements for high-complexity testing (36).

To enhance oversight of genetic testing under CLIA, CMS developed a plan to promote a comprehensive approach for effective application of current regulations and to provide training and guidelines to surveyors and laboratories that perform genetic testing (16). CDC and CMS also have been assessing the need to revise and update CLIA requirements for proficiency testing programs and laboratories, taking into consideration the need for improved performance evaluation for laboratories that perform genetic testing (37).

Studies and reports since 1997 have revealed a broad range of concerns related to molecular genetic testing for heritable diseases and conditions, including safe and effective translation of research findings into patient testing, the quality of test performance and results interpretation, appropriate use of testing information and services in health management and patient care, the adequacy of quality assurance measures, and concerns involving the ethical, legal, economic, and social aspects of molecular genetic testing (1,9,22,38,39). Some of these concerns are indicative of the areas of laboratory practice that are in need of improvement, such as performance establishment and verification, proficiency testing, personnel qualifications and training, and results reporting (1,9,11,22,39).

Studies have indicated that although error rates associated with different areas of laboratory testing vary (40), the overall distribution of errors reported in the preanalytic, analytic, and postanalytic phases of the testing process are similar for many testing areas, including molecular genetic testing (9,11,39,40). The preanalytic phase encompasses test selection and ordering and specimen collection, processing, handling, and delivery to the testing site. The analytic phase includes selection of test methods, performance of test procedures, monitoring and verification of the accuracy and reliability of test results, and documentation of test findings. The postanalytic phase includes reporting test results and archiving records, reports, and tested specimens (41).

Studies have indicated that errors are more likely to occur during the preanalytic and postanalytic phases of the testing process than during the analytic phase, with most errors reported for the preanalytic phase (40,42--44). In the preanalytic phase, inappropriate selection of laboratory tests has been a significant source of errors (42,43). Misuse of laboratory services, such as unnecessary or inappropriate test requests, might lead to increased risk for medical errors, adverse patient outcome, and increased health-care costs (43). Although no study has determined the overall number of molecular genetic tests performed that could be considered unwarranted or unnecessary, a study of the use and interpretation of adenomatous polyposis coli gene (APC) testing for familial adenomatous polyposis and other heritable conditions associated with colonic polyposis indicated that 17% of the cases evaluated did not have valid indications for testing (22).

Although data are limited, studies also indicate that improvements are needed in the analytic phase of molecular genetic testing. A study of the frequency and severity of errors associated with DNA-based genetic testing revealed that errors related to specimen handling in the laboratory and other analytic steps ranged from 0.06% to 0.12% of approximately 92,000 tests evaluated (39). A subsequent meta-analysis indicated that these self-reported error rates were comparable to those detected in nongenetic laboratory testing (40). An analysis of performance data from the CAP molecular genetic survey program during 1995--2000 estimated the overall error rate for cystic fibrosis mutation analysis to be 1.5%, of which approximately 50% of the errors occurred during the analytic or postanalytic phases of testing (45). Unrecognized sequence variations or polymorphisms also could affect the ability of molecular genetic tests to detect or distinguish the genotypes being analyzed, leading to false-positive or false-negative test results. Such problems have been reported for some commonly performed genetic tests such as cystic fibrosis mutation analysis and testing for HFE-associated hereditary hemochromatosis (46,47).

The postanalytic phase of molecular genetic testing involves analysis of test results, preparation of test reports, and results reporting. The study on the use of the APC gene testing and interpretation of test results indicated that lack of awareness among health-care providers of APC test limitations was a primary reason for misinterpretation of test results (22). In a study assessing the comprehensiveness and usefulness of reports for cystic fibrosis and factor V Leiden thrombophilia testing, physicians in many medical specialties considered reports that included information beyond that specified by the general CLIA test report requirements to be more informative and useful than test reports that only met CLIA requirements; additional information included patient race/ethnicity, clinical history, reasons for test referral, test methodology, recommendations for follow-up testing, implications for family members, and suggestions for genetic counseling (48). Consistent with these findings, international guidelines for quality assurance in molecular genetic testing recommend that molecular genetic test reports be accurate, concise, and comprehensive and communicate all essential information to enable effective decision-making by patients and health care professionals (49).

Proficiency testing is a well-established practice for monitoring and improving the quality of laboratory testing (50,51) and is a key component of the external quality assessment process. Studies have indicated that using proficiency testing samples that resemble actual patient specimens could improve monitoring of laboratory performance (50,52--54). Participation in proficiency testing has helped laboratories reduce analytic deficiencies, improve testing procedures, and take steps to prevent future errors (55--59).

CLIA regulations have not yet included proficiency testing requirements for molecular genetic tests. Laboratories that perform molecular genetic testing must meet the general CLIA requirement to verify, at least twice annually, the accuracy of the genetic tests they perform (493.1236[c]) (36). Laboratories may participate in available proficiency testing programs for the genetic tests they perform to meet this CLIA alternative performance assessment requirement. Proficiency testing participation correlates significantly with the quality assurance measures in place among laboratories that perform molecular genetic testing (9,10). Because proficiency testing is a rigorous external assessment for laboratory performance, in 2008, SACGHS recommended that proficiency testing participation be required for all molecular genetic tests for which proficiency testing programs are available (1). Formal molecular genetic proficiency testing programs are available only for a limited number of tests for heritable diseases and conditions; in addition, the samples provided often are purified DNA, which do not typically require performance of all steps of the testing process, such as nucleic acid extraction and preparation (60). For many genetic conditions that are either rare or for which testing is performed by one or a few laboratories, substantial challenges in developing formal proficiency testing programs have been recognized (1).

Development of effective alternative performance assessment approaches to proficiency testing is essential for ensuring the quality of molecular genetic testing (1). Professional guidelines have been developed for laboratories to evaluate and monitor test performance when proficiency testing programs are not available (61). However, reports of the CAP molecular pathology on-site inspections indicate that deficiencies related to participation in interlaboratory comparison or alternative performance assessment are among the most frequently identified deficiencies, accounting for 3.9% of all deficiencies cited (62).

The ability of a test to diagnose or predict risk for a particular health condition is the test's clinical validity, which often is measured by clinical (or diagnostic) sensitivity, clinical (or diagnostic) specificity, and predictive values of the test for a given health condition. Clinical validity can be influenced by factors such as the prevalence of the disease or health condition, penetrance (proportion of persons with a mutation causing a particular disorder who exhibit clinical symptoms of the disorder), and modifiers (genetic or environmental factors that might affect the variability of signs or symptoms that occur with a phenotype of a genetic alteration). For genetic tests, clinical validity refers to the ability of a test to detect or predict the presence or absence of a particular disease or phenotype and often corresponds to associations between genotypes and phenotypes (1,28,63--69). The usefulness of a test in clinical practice, referred to as clinical utility, involves identifying the outcomes associated with specific test results (28). Clinical validity and clinical utility should be assessed individually for each genetic test because the implications might vary depending on the health condition and population being tested (38).

As advances in genomic research and technology result in rapid development of new genetic tests, concerns have been raised that certain tests, particularly predictive genetic tests, could become available without adequate assessment of their validity, benefits, and utility. Consequently, health professionals and consumers might not be able to make a fully informed decision about whether or how to use these tests. In 1997, a task force formed by a National Institutes of Health (NIH)--Department of Energy workgroup recommended that laboratories that perform patient testing establish clinical validity for the genetic tests they develop before offering them for patient testing and carefully review and document evidence of test validity if the test has been developed elsewhere (70). This recommendation was later included in a report of the Secretary's Advisory Committee on Genetic Testing (SACGT), which was established in 1998 to advise HHS on medical, scientific, ethical, legal, and social concerns raised by the development and use of genetic tests (38).

Public concerns about inadequate knowledge or documentation of the clinical validity of certain genetic tests were also recognized by SACGHS, the advisory committee that was established by HHS in 2002 to supersede SACGT (1). SACGHS recommended the development and support of sustainable public-private collaborations to fill the gaps in knowledge of the analytic validity, clinical validity, clinical utility, economic value, and population health impact of molecular genetic tests (1). Collaborative efforts that have been recognized include the Evaluation of Genomic Applications in Practice and Prevention (EGAPP) program, a CDC initiative to establish and evaluate a systematic, evidence-based process for assessing genetic tests and other applications of genomic technology in transition from research to clinical practice and public health (71), and the Collaboration, Education, and Test Translation (CETT) Program, which is overseen by the NIH Office of Rare Diseases to promote the effective transition of potential genetic tests for rare diseases from research settings into clinical settings (72).

The increase in direct-to-consumer (DTC) genetic testing (i.e., genetic tests offered directly to consumers with no health-care provider involvement) has raised concerns about the potential risks or misuses of certain genetic tests (73). As of October 2008, consumers could directly order laboratory tests in 27 states; in another 10 states, consumer-ordered tests are allowed under defined circumstances (74). As DTC genetic tests become increasingly available, various genetic profile tests have been marketed directly to the public that claim to answer questions regarding cardiovascular risks, drug metabolism, dietary arrangements, and lifestyles (73). In addition, DTC advertisements have caused a substantial increase in the demand for molecular genetic tests, such as those for hereditary breast and ovarian cancers (75,76). Although allowing easy access to the testing services, DTC genetic testing has raised concerns about the potential for inadequate pretest decision-making, misunderstanding of test results, access to tests of questionable clinical value, lack of necessary follow-up, and unexpected additional responsibilities for primary care physicians (77--80). Both the government and professional organizations have developed educational materials that provide guidance to consumers, laboratories, genetics professionals, and professional organizations regarding DTC genetic tests (80--82).

Studies indicate that qualifications of laboratory personnel, including training and experience, are critical for ensuring quality performance of genetic testing, because human error has the greatest potential influence on the quality of laboratory test results (9,83,84). A study of laboratories in the United States that perform molecular genetic testing suggested that laboratory adherence to voluntary quality standards and guidelines for genetic testing was significantly associated with laboratories directed or supervised by persons with board certification in medical genetics (9). Results of an international survey revealed a similar correlation between the quality assurance practices of a molecular genetic testing laboratory and the formal training of the laboratory director (10). Overall, the concerns recognized in publications and documented cases support the need to have trained, qualified personnel at all levels to ensure the quality of all phases of the genetic testing process.

To monitor and assess the scope and growth of molecular genetic testing in the United States, data were collected and analyzed from scientific articles, government reports, the CMS CLIA database, information from state programs, studies by professional groups, publicly available directories and databases of laboratories and laboratory testing, industry reports, and CDC studies (1--3,5,6,9,29,38,83,85--88). To evaluate factors in molecular genetic testing that might affect testing quality and to identify areas that would benefit from quality assurance guidelines, various documents were considered, including professional practice guidelines, CAP laboratory accreditation checklists, CLSI guidelines, state requirements, and international guidelines and standards (12--15,49,61,89--95).

Since 1997, CLIAC has provided HHS with recommendations on approaches needed to ensure the quality of genetic testing (37). At the February 2007 CLIAC meeting, CLIAC asked CDC and CMS to clarify critical concerns in genetic testing oversight and to provide a status report at the subsequent CLIAC meeting. At the September 2007 CLIAC meeting, CDC presented an overview of the regulatory oversight and voluntary measures for quality assurance of genetic testing and described a plan to develop and publish educational material on good laboratory practices. CDC solicited CLIAC recommendations to address concerns that presented particular challenges related to genetic testing oversight, including establishment and verification of performance specifications, control procedures for molecular amplification assays, proficiency testing, genetic test reports, personnel competency assessment, and the definition of genetic tests. CLIAC recommended convening a workgroup of experts in genetic testing to consider these concerns and provide input for CLIAC deliberation.

The CLIAC Genetic Testing Good Laboratory Practices Workgroup was formed. The workgroup conducted a series of meetings on the scope of laboratory practice recommendations needed for genetic testing and suggested that recommendations first be developed for molecular genetic testing for heritable diseases and conditions. The workgroup evaluated good laboratory practices for all phases of the genetic testing process after reviewing professional guidelines, regulatory and voluntary standards, accreditation checklists, international standards and guidelines, and other documents that provided general or specific quality standards applicable to molecular genetic testing for heritable diseases and conditions (1,12--15,36,41,49,61,80,82,91--109). The workgroup also reviewed information on the HHS-approved and other certification boards for laboratory personnel and the number of persons certified in each of the specialties for which certification is available (110--118). Workgroup suggestions were reported to CLIAC at the September 2008 committee meeting. The CLIAC recommendations were formed on the basis of the workgroup report and additional CLIAC recommendations. The committee recommended that CDC include the CLIAC-recommended good laboratory practices for molecular genetic testing in the planned publication. Summaries of CLIAC meetings and CLIAC recommendations are available (37).

The following recommended good laboratory practices are for areas of molecular genetic testing for heritable diseases and conditions in need of guidelines for complying with existing CLIA requirements or in need of additional quality assurance measures. These recommendations are not intended to encompass the entire realm of laboratory practice; they are meant to provide guidelines for specific quality concerns in the performance and delivery of laboratory services for molecular genetic testing for heritable diseases and conditions.

These recommendations address laboratory practices for the total testing process, including the preanalytic, analytic, and postanalytic phases of molecular genetic testing. The recommendations for the preanalytic phase include guidelines for laboratory responsibilities for providing information to users of laboratory services, informed consent, test requests, specimen submission and handling, test referrals, and preanalytic systems assessment. The recommendations for the analytic phase include guidelines for establishment and verification of performance specifications, quality control procedures, proficiency testing, and alternative performance assessment. The recommendations for the postanalytic phase include guidelines for test reports, retention of records and reports, and specimen retention. The recommendations also address responsibilities of laboratories regarding authorized persons, confidentiality of patient information and test results, personnel competency, factors to consider before introducing molecular genetic testing or offering new molecular genetic tests, and the potential benefits of the quality management system approach in molecular genetic testing. Recommendations are provided in relation to applicable provisions in the CLIA regulations and, when necessary, are followed by a description of how the recommended practices can be used to improve quality assurance and quality assessment for molecular genetic testing. A list of terms and abbreviations used in this report also is provided (Appendix A).

Laboratories are responsible for providing information regarding the molecular genetic tests they perform to users of their services; users include authorized persons under applicable state law, health-care professionals, patients, referring laboratories, and payers of laboratory services. Laboratories should review the genetic tests they perform and the procedures they use to provide and update the recommended test information that follows. At a minimum, laboratories should ensure that the test information is available from accessible sources such as websites, service directories, information pamphlets or brochures, newsletters, instructions for specimen submission, and test request forms. Laboratories that already provide the information from these sources should continue to do so. However, laboratories also might decide to provide the information more directly to their users (e.g., by telephone, e-mail, or in an in-person meeting) and should determine the situations in which such direct communication is necessary. The complexity of language used should be appropriate for the particular laboratory user groups (e.g., for patients, plain language understandable by the general public).

Test selection, test performance, and specimen submission. Laboratories should provide information regarding the molecular genetic tests they perform to users of their services to facilitate appropriate test selection and requests, specimen handling and submission, and patient care. Each laboratory that performs molecular genetic testing for heritable diseases and conditions should provide the following information to its users:

--- Intended use of the test, including the nucleic acid target of the test (e.g., genes, sequences, mutations, or polymorphisms), the purpose of testing (e.g., diagnostic, preconception, or predictive), and the recommended patient populations

--- Indications for testing

--- Test method to be used, presented in user-friendly language in relation to the performance specifications and the limitations of the test (with Current Procedural Terminology [CPT] codes included when appropriate)

--- Specifications of applicable performance characteristics, including information on analytic validity and clinical validity

--- Limitations of the test

--- Whether testing is performed with an FDA-approved or FDA-cleared test system, with a laboratory-developed test or test system that is not approved or cleared by FDA, or with an investigational test under FDA oversight

Cost. When possible and practical, laboratories should provide users with information on the charges for molecular genetic tests being performed. Estimating the expenses that a patient might incur from a particular genetic test might be difficult for certain laboratories and providers because fee schedules of individual laboratories can vary depending on the health-care payment policy selections of each patient. However, advising the patient and family members of the financial implications of the tests, whenever possible, facilitates informed decision-making.

Discussion. Under CLIA, laboratories are required to develop and follow written policies and procedures for specimen submission and handling, specimen referral, and test requests (42 CFR 493.1241 and 1242). Laboratories must ensure positive identification and optimum integrity of specimens from the time of collection or receipt through the completion of testing and reporting of test results (42 CFR 493.1232). In addition, laboratories that perform nonwaived testing must ensure that a qualified clinical consultant is available to assist laboratory clients with ordering tests appropriate for meeting clinical expectations (42 CFR 493.1457[b]). The recommended laboratory practices in this report describe laboratory responsibilities for ensuring appropriate test requests and specimen submission for the molecular genetic tests they perform, in addition to laboratory responsibilities for meeting CLIA requirements. The recommendations emphasize the role of laboratories in providing specific information needed by users before decisions are made regarding test selection and ordering, based on consideration of several factors.

First, molecular genetic tests for heritable diseases and conditions are being rapidly developed and increasingly used in health-care settings. Users of laboratory services need the ability to easily access information regarding the intended use, performance specifications, and limitations of the molecular genetic tests a laboratory offers to determine appropriate testing for specific patient conditions.

Second, many molecular genetic tests are performed using laboratory-developed tests or test systems. The performance specifications and limitations of the testing might vary among laboratories, even for the same disease or condition, depending on the specific procedures used. Users of laboratory services who are not provided information related to the appropriateness of the tests being considered might select tests that are not indicated or cannot meet clinical expectations.

Third, for many heritable diseases and conditions, test performance and interpretation of test results require information regarding patient race/ethnicity, family history, and other pertinent clinical and laboratory information. Informing users before tests are ordered of the specific patient information needed by the laboratory should facilitate test requests and allow prompt initiation of appropriate testing procedures and accurate interpretation of test results.

Finally, providing information to users on performance specifications and limitations of tests before test selection and ordering prepares users of laboratory services for understanding test results and implications. CLIA test report requirements (42 CFR 493.1291[e]) indicate that laboratories are required to provide users of their services, on request, with information on laboratory test methods and the performance specifications the laboratory has established or verified for the tests. However, for molecular genetic tests for heritable diseases and conditions, laboratories should provide test performance information to users before test selection and ordering, rather than waiting for a request after the test has been performed. The information provided in the preanalytic phase must be consistent with information included on test reports.

Providing molecular genetic testing information to users before tests are selected and ordered should improve test requests and specimen submission and might reduce unnecessary or unwarranted testing. The recommended practices also might increase informed decision-making, improve interpretation of results, and improve patient outcome.

A person who provides informed consent voluntarily confirms a willingness to undergo a particular test, after having been informed of all aspects of the test that are relevant to the patient's decision (49). Informed consent for genetic testing or specific types of genetic tests is required by law in certain states; as of June 2008, 12 states required that informed consent be obtained before a genetic test is requested or performed (119). In addition, certain states (e.g., Massachusetts, Michigan, Nebraska, New York, and South Dakota) have included required informed consent components in their statutes [97,120--123]) (Appendix B). These state statutes can be used as examples for laboratories in other states that are developing specific informed consent forms. Professional organizations recommend that informed consent be obtained for testing for many inherited genetic conditions (12,13). CLIA regulations have no requirements for laboratory documentation of informed consent for requested tests; however, medical decisions for patient diagnosis or treatment should be based on informed decision-making (124). Regardless of whether informed consent is required, laboratories that perform molecular genetic tests for heritable diseases and conditions should be responsible for providing users with the information necessary to make informed decisions.

Informed consent is in the purview of the practice of medicine; the persons authorized to order the tests are responsible for obtaining the appropriate level of informed consent (67). Unless mandated by state or local requirements, obtaining informed consent before performing a test generally is not considered a laboratory responsibility. For molecular genetic testing for heritable diseases and conditions, not all tests require written patient consent before testing (125). However, when informed consent for patient testing is recommended or required by law or other applicable requirements as a method for documenting the process and outcome of informed decision-making, laboratories should ensure that certain practices are followed:

Laboratories should refer to professional guidelines for additional information regarding informed consent for molecular genetic tests and should consider available models when developing the content, format, and procedures for documentation of patient consent.

CLIA requirements (42 CFR 493.1241[c]) specify that laboratories that perform nonwaived testing must ensure that the test request solicits the following information: 1) the name and address or other suitable identifiers of the authorized person requesting the test and (if applicable) the person responsible for using the test results, or the name and address of the laboratory submitting the specimen, including (if applicable) a contact person to enable reporting of imminently life-threatening laboratory results or critical values; 2) patient name or a unique patient identifier; 3) sex and either age or date of birth of the patient; 4) the tests to be performed; 5) the source of the specimen (if applicable); 6) the date and (if applicable) time of specimen collection; and 7) any additional information relevant and necessary for a specific test to ensure accurate and timely testing and reporting of results, including interpretation (if applicable). For molecular genetic testing for heritable diseases and conditions, laboratories must comply with these CLIA requirements and should solicit the following additional information on test requests:

Patient name and any other unique identifiers needed for testing. CLIA test request requirements indicate that laboratories must solicit patient names or unique patient identifiers on test requests (42 CFR 493.1241[c][2]). Laboratories that perform molecular genetic testing for heritable diseases and conditions should ensure that at least two unique identifiers are solicited on these test requests, which should include patient names, when possible, and any other unique identifiers needed to ensure patient identification. In certain situations (e.g., compatibility testing for which donor names are not always provided to the laboratory), an alternative unique identifier is appropriate.

Date of birth. CLIA requirements specify that test requests must solicit the sex and either age or date of birth of the patient (42 CFR 493.1241[c][3]). For molecular genetic testing for heritable diseases and conditions, patient date of birth is more informative than age and should be obtained when possible.

Indications for testing, relevant clinical and laboratory information, patient race/ethnicity, family history, and pedigree. Obtaining information on indications for testing, relevant clinical or laboratory information, patient racial/ethnic background, family history, and pedigree is critical for selecting appropriate test methods, determining the mutations or variants to be tested, interpreting test results, and timely reporting of test results. Genetic conditions often have different disease prevalences with various mutation frequencies and distributions among racial/ethnic groups. Unique, or private, mutations or genotypes might be present only in specific families or can be associated with founder effects (i.e., gene mutations observed in high frequency in a specific population because of the presence of the mutation in a single ancestor or small number of ancestors in the founding population). Family history and other relevant clinical or laboratory information are often important for determining whether the test requested might meet the clinical expectations, including the likelihood of identifying a disease-causing mutation. Specific race/ethnicity, family history, and other pertinent information to be solicited on a test request should be determined according to the specific disease or condition for which the patient is being tested. Laboratories should consider available guidelines for requesting and obtaining this additional information and determine circumstances in which more specific patient information is needed for particular genetic tests (126,127). Although this information is not specified in CLIA, the regulations provide laboratories the flexibility to determine and solicit relevant and necessary information for a specific test (42 CFR 493.1241[c][8]). The recommended test request components also are consistent with many voluntary professional and accreditation guidelines (12--14).

Documentation of informed consent. Methods for indicating and documenting informed consent on a test request might include a statement, text box, or check-off box on the test request form to be signed or checked by the test requestor; a separate form to be signed as part of the test request; or another method that complies with applicable requirements and adheres to professional guidelines. In addition, when state or local laws or regulations specify that patient consent must be obtained regarding the use of tested specimens for quality assurance or other purposes, the test request must include a way for the test requestor to indicate the decision of the patient. Laboratories also might determine that other situations merit documentation of consent before testing.

CLIA requires laboratories to establish and follow written policies and procedures for patient preparation, specimen collection, specimen labeling (including patient name or unique patient identifier and, when appropriate, specimen source), specimen storage and preservation, conditions for specimen transportation, specimen processing, specimen acceptability and rejection, and referral of specimens to another laboratory (42 CFR 493.1242). If a laboratory accepts a referral specimen, appropriate written instructions providing information on specimen handling and submission must be available to the laboratory clients. The following recommendations are intended to help laboratories that perform molecular genetic testing meet general CLIA requirements and to provide additional guidelines on quality assurance measures for specimen submission, handling, and referral for molecular genetic testing. Before test selection and ordering, laboratories that perform molecular genetic testing should provide their users with instructions on specimen collection, handling, transport, and submission. Information on appropriate collection, handling, and submission of specimens for molecular genetic tests should include the following:

Criteria for specimen acceptance or rejection. Laboratories should have written criteria for acceptance or rejection of specimens for the molecular genetic tests they perform and should promptly notify the authorized person when a specimen meets the rejection criteria and is determined to be unsuitable for testing. The criteria should include information on determining the existence of and addressing the following situations:

Retention and exchange of information throughout the testing process. Information on test requests and test reports is a particularly important component of the complex communication between genetic testing laboratories and their users. Laboratories should have policies and procedures in place to ensure that information needed for selection of appropriate test methods, test performance, and results interpretation is retained throughout the entire molecular genetic testing process. This recommendation is based on CLIAC recognition of instances in which information on test requests or test reports was removed by electronic or other information systems during specimen submission, results reporting, or test referral. CLIA requires laboratories to ensure the accuracy of test request or authorization information when transcribing or entering the information into a record system or a laboratory information system (42 CFR 493.1241[e]). For molecular genetic tests, information on test requests and test reports should be retained accurately and completely throughout the testing process.

Specimen referral. CLIA requires laboratories to refer specimens for any type of patient testing to CLIA-certified laboratories or laboratories that meet equivalent requirements as determined by CMS (42 CFR 493.1242[c]). Examples of laboratories that meet equivalent requirements include Department of Veterans Affairs laboratories, Department of Defense laboratories, and laboratories in CLIA-exempt states.

Laboratories must have written policies and procedures for assessing and correcting problems identified in test requests, specimen submission, and other preanalytic steps of molecular genetic testing (42 CFR 493.1249). The preanalytic systems assessment for molecular genetic testing should include the following practices:

CLIA requires laboratories to establish or verify the analytic performance of all nonwaived tests and test systems before introducing them for patient testing and to determine the calibration and control procedures of tests based on the performance specifications verified or established. Before reporting patient test results, each laboratory that introduces an unmodified, FDA-cleared or FDA-approved test system must 1) demonstrate that the manufacturer-established performance specifications for accuracy, precision, and reportable range of test results can be reproduced and 2) verify that the manufacturer-provided reference intervals (or normal values) are appropriate for the laboratory patient population (42 CFR 493.1253). Laboratories are subject to more stringent requirements when introducing 1) FDA-cleared or FDA-approved test systems that have been modified by the laboratory, 2) laboratory-developed tests or test systems that are not subject to FDA clearance or approval (e.g., standardized methods and textbook procedures), or 3) test systems with no manufacturer-provided performance specifications. In these instances, before reporting patient test results, laboratories must conduct more extensive procedures to establish applicable performance specifications for accuracy, precision, analytic sensitivity, analytic specificity; reportable range of test results; reference intervals, or normal values; and other performance characteristics required for test performance.

Although laboratories that perform molecular genetic testing for heritable diseases and conditions must comply with these general CLIA requirements, additional guidelines are needed to assist with establishment and verification of performance specifications for these tests. The recommended laboratory practices that follow are primarily intended to provide specific guidelines for establishing performance specifications for laboratory-developed molecular genetic tests to ensure valid and reliable test performance and interpretation of results. The recommendations also might be used by laboratories to verify performance specifications of unmodified FDA-cleared or FDA-approved molecular genetic test systems to be introduced for patient testing.

Factors that should be considered when developing performance specifications for molecular genetic tests include the intended use of the test; target genes, sequences, and mutations; intended patient populations; test methods; and samples to be used (99). The following five steps should be considered general principles for establishing performance specifications of each new molecular genetic test:

Samples for establishment of performance specifications. Establishment of performance specifications should be based on an adequate number, type, and variety of samples to ensure that test results can be interpreted for specific patient conditions and that the limitations of the testing and test results are known. When selecting samples, the following factors should be considered:

Analytic performance specifications. Laboratories should determine performance specifications for all of the following analytic performance characteristics for molecular genetic tests that are not cleared or approved by FDA before introducing the tests for patient testing:

Accuracy. Accuracy is commonly defined as "closeness of the agreement between the result of a measurement and a true value of the measurand" (128). For qualitative molecular genetic tests, laboratories are responsible for verifying or establishing the accuracy of the method used to identify the presence or absence of the analytes being evaluated (e.g., mutations, variants, or other targeted nucleic acids). Accuracy might be assessed by testing reference materials, comparing test results against results of a reference method, comparing split-sample results with results obtained from a method shown to provide clinically valid results, or correlating research results with the clinical presentation when establishing a test system for a new analyte, such as a newly identified disease gene (96).

Precision. Precision is defined as "closeness of agreement between independent test results obtained under stipulated conditions" (129). Precision is commonly determined by assessing repeatability (i.e., closeness of agreement between independent test results for the same measurand under the same conditions) and reproducibility (i.e., closeness of agreement between independent test results for the same measurand under changed conditions). Precision can be verified or established by assessing day-to-day, run-to-run, and within-run variation (as well as operator variance) by repeat testing of known patient samples, quality control materials, or calibration materials over time (96).

Analytic sensitivity. Practice guidelines vary in their definitions of analytic sensitivity; certain guidelines consider analytic sensitivity to be the ability of an assay to detect a given analyte, or the lower limit of detection (LOD) (93), whereas guidelines for molecular genetic testing for heritable diseases consider analytic sensitivity to be "the proportion of biological samples that have a positive test result or known mutation and that are correctly classified as positive" (12). However, determining the LOD of a molecular genetic test or test system is often needed as part of the performance establishment and verification (93). To avoid potential confusion among users and the general public in understanding the test performance and test results, laboratories should review and follow applicable professional guidelines before testing is introduced and ensure the guidelines are followed consistently throughout performance establishment and verification and during subsequent patient testing. Analytic sensitivity should be determined for each molecular genetic test before the test is used for patient testing.

Analytic specificity. Analytic specificity is generally defined as the ability of a test method to determine only the target analytes to be detected or measured and not the interfering substances that might affect laboratory testing. Interfering substances include factors associated with specimens (e.g., specimen hemolysis, anticoagulant, lipemia, and turbidity) and factors associated with patients (e.g., clinical conditions, disease states, and medications) (96). Laboratories must document information regarding interfering substances and should use product information, literature, or the laboratory's own testing (96). Accepted practice guidelines for molecular genetic testing, such as those developed by ACMG, CAP, and CLSI, define analytic specificity as the ability of a test to distinguish the target sequences, alleles, or mutations from other sequences or alleles in the specimen or genome being analyzed (12--14). The guidelines also address documentation and determination of common interfering substances specific for molecular detection (e.g., homologous sequences, contaminants, and other exogenous or endogenous substances) (12--14). Laboratories should adhere to these specific guidelines in establishing or verifying analytic specificity for each of their molecular genetic tests.

Reportable range of test results. As defined by CLIA, the reportable range of test results is "the span of test result values over which the laboratory can establish or verify the accuracy of the instrument or test system measurement response" (36). The reportable range of patient test results can be established or verified by assaying low and high calibration materials or control materials or by evaluating known samples of abnormally high and low values (96). For example, laboratories should assay quality control or reference materials, or known normal samples, and samples containing mutations to be detected for targeted mutation analyses. For analysis of trinucleotide repeats, laboratories should include samples representing the full range of expected allele lengths (130).

Reference range, or reference interval (i.e., normal values). As defined by CLIA, a reference range, or reference interval, is "the range of test values expected for a designated population of persons (e.g., 95% of persons that are presumed to be healthy [or normal])" (36). The CMS Survey Procedures and Interpretive Guidelines for Laboratories and Laboratory Services provides general guidelines regarding the use of manufacturer-provided or published reference ranges appropriate for the patient population and evaluation of an appropriate number of samples to verify manufacturer claims or published reference ranges (96). For all laboratory-developed tests, the laboratory is responsible for establishing the reference range appropriate for the laboratory patient population (including demographic variables such as age and sex) and specimen types (96). For molecular genetic tests for heritable diseases and conditions, normal values might refer to normal alleles in targeted mutation analyses or the reference sequences for sequencing assays. Laboratories should be aware that advances in knowledge and testing technology might affect the recognition and documentation of normal sequences and should keep an updated database for the molecular genetic tests they perform.

Quality control procedures. CLIA requires laboratories to determine the calibration and control procedures for nonwaived tests or test systems on the basis of the verification or establishment of performance specifications for the tests (42 CFR 493.1253[b][3]). Laboratories that perform molecular genetic tests must meet these requirements and, for every molecular genetic test to be introduced for patient testing, should consider the recommended quality control practices.

Documentation of information on clinical validity. Laboratories should ensure that the molecular genetic tests they perform are clinically usable and can be interpreted for specific patient situations. Laboratory responsibilities for clinical validity include the following:

Although CLIA regulations do not include validation of clinical performance specifications of new tests or test systems, laboratories are required to ensure that the tests being performed meet clinical expectations. For tests of high complexity, such as molecular genetic tests, laboratory directors and technical supervisors are responsible for ensuring that the testing method is appropriate for the clinical use of the test results and can provide the quality of results needed for patient care (36). Laboratory directors and clinical consultants must ensure laboratory consultations are available for laboratory clients regarding the appropriateness of the tests ordered and interpretation of test results (36). Documentation of available clinical validity information helps laboratories that perform molecular genetic testing to fulfill their responsibilities for consulting with health-care professionals and other users of laboratory services, especially regarding tests that evaluate germline mutations or variants that might be performed only once during a patient's lifetime.

Establishing clinical validity is a continuous process and might require extended studies and involvement of many disciplines (38). The recommendations in this report emphasize the responsibility of laboratories that perform molecular genetic testing to document available information from medical and scientific research studies on the intended patient populations to be able to perform testing and provide results interpretation appropriate for specific clinical contexts. Laboratory directors are responsible for using professional judgment to evaluate the results of such studies as applied to newly discovered gene targets, especially those of a predictive or incompletely penetrant nature, in considering potential new tests. The recommendations in this report are consistent with the voluntary professional and accreditation guidelines of ACMG, CLSI, and CAP for molecular genetic testing (12--14,93,94).

General quality control practices. The analytic phase of molecular genetic testing often includes the following steps: specimen processing; nucleic acid extraction, preparation, and assessment; enzymatic reaction or amplification; analyte detection; and recording of test results. Laboratories that perform molecular genetic testing must meet the general CLIA requirements for nonwaived testing (42 CFR 493.1256) (36), including the following applicable quality control requirements:

--- At least two control materials of different concentrations for each quantitative procedure

--- A negative control material and a positive control material for each qualitative procedure

--- A negative control material and a control material with graded or titered reactivity, respectively, for each test procedure producing graded or titered results

--- Two control materials, including one that is capable of detecting errors in the extraction process, for each test system that has an extraction phase

--- Two control materials for each molecular amplification procedure and, if reaction inhibition is a substantial source of false-negative results, a control material capable of detecting the inhibition

Specific quality control practices. Specific quality control practices are necessary for ensuring the quality of molecular genetic test performance. The following recommendations include specific guidelines for meeting the general CLIA quality control requirements and additional measures that are more stringent or explicit than the CLIA requirements for monitoring and ensuring the quality of the molecular genetic testing process:

Alternative control procedures. Ideally, laboratories should use control materials to monitor the entire testing process, but such materials are not always practical or available. Appropriate alternative control procedures depend on the specific test and the control materials needed. Following are examples of accepted alternative control procedures when control materials are not available:

The CMS Survey Procedures and Interpretive Guidelines for Laboratories and Laboratory Services provides general guidelines for alternative control procedures and encourages laboratories to use multiple mechanisms for ensuring testing quality (96). Following are examples of procedures that, when applicable, should be followed by laboratories that perform molecular genetic testing:

Unidirectional workflow for molecular amplification procedures. CLIA requires laboratories to have procedures in place to monitor and minimize contamination during thetesting process and to ensure a unidirectional workflow for amplification procedures that are not contained in closed systems (42 CFR 493.1101) (36). In this context, a closed system is a test system designed to be fully integrated and automated to purify, concentrate, amplify, detect, and identify targeted nucleic acid sequences. Such a modular system generates test results directly from unprocessed samples without manipulation or handling by the user; the system does not pose a risk for cross-contamination because amplicon-containing tubes and compartments reamain completely closed during and after the testing process. For example, according to CLIA regulations, an FDA-cleared or FDA-approved test system that contains amplification and detection steps in sealed tubes that are never opened or reopened during or after the testing process and that is used as provided by the manufacturer (i.e., without any modifications) is considered a closed system.

The requirement for a unidirectional workflow, which includes having separate areas for specimen preparation, amplification, product detection, and reagent preparation, applies to any testing that involves molecular amplification procedures. The following recommendations provide more specific guidelines for laboratories that perform molecular genetic testing for heritable diseases and conditions using amplification procedures that are not in a closed system:

Laboratories should recognize that methods such as PCR amplification, whole genome amplification, or subcloning to prepare quality control materials might be a substantial source of laboratory contamination. These laboratories should have the following specific procedures to monitor, detect, and prevent cross-contamination:

These practices also should be considered by laboratories that purchase amplified materials for use as control materials, calibration materials, or competitors.

Proficiency testing is an important tool for assessing laboratory competence, evaluating the laboratory testing process, and providing education for the laboratory personnel. For certain analytes and testing specialties for which CLIA regulations specifically require proficiency testing, proficiency testing is provided by private-sector and state-operated programs that are approved by HHS because they meet CLIA standards (42 CFR Part 493). These approved programs also may provide proficiency testing for genetic tests and other tests that are not on the list of regulated analytes and specialties (131). Although the CLIA regulations do not have proficiency testing requirements specific for molecular genetic tests, laboratories that perform genetic tests must comply with the general requirements for alternative performance assessment for any test or analyte not specified as a regulated analyte to, at least twice annually, verify the accuracy of any genetic test or procedure they perform (42 CFR 493.1236[c]). Laboratories can meet this requirement by participating in available proficiency testing programs for the genetic tests they perform (132).

The following recommended practices provide more specific and stringent measures than the current CLIA requirements for performance assessment of molecular genetic testing. The recommendations should be considered by laboratories that perform molecular genetic testing to monitor and evaluate the ongoing quality of the testing they perform:

Proficiency testing samples. When possible, proficiency testing samples should resemble patient specimens; at a minimum, samples resembling patient specimens should be used for proficiency testing for the most common genetic tests. When proficiency testing samples are provided in the form of purified DNA, participating laboratories do not perform all the analytic steps that occur during the patient testing process (e.g., nucleic acid extraction and preparation). Such practical limitations should be recognized when assessing proficiency testing performance. Laboratories are encouraged to enroll in proficiency testing programs that examine the entire testing process, including the preanalytic, analytic, and postanalytic phases.

See original here:
Good Laboratory Practices for Molecular Genetic Testing ...

Comments are closed.